YakAttack - CellBlok and SwitchBlade Combo
YakAttack CellBlok and SwitchBlade Combo
Getting a fish finder installed on a kayak without drilling holes, running wires through the hull, or ending up with a cluttered, hard-to-remove setup has always been more complicated than it should be. The CellBlok and SwitchBlade Combo solves all of that in one clean package.
The CellBlok is a track-mounted battery box whose top surface doubles as a mounting platform for both the SwitchBlade Transducer Arm and your fish finder mount, keeping everything self-contained and removable as a single unit. Two track mount knobs are all that hold it in place, so the whole system attaches and detaches quickly without tools. Injection-moulded construction keeps weight down to 1.4 lbs, and enlarged cable wraps accommodate the larger wiring used in modern fish finders. A minimum of 10.5" of track is required for installation.
The SwitchBlade Transducer Arm is built around a hydrodynamic blade design that minimises water turbulence and gurgle, making it quieter and more efficient than conventional transducer arms. The multi-pivot folding design collapses compactly when not in use, and the arm length is fully customisable by cutting to fit your specific kayak. Remove the middle arm section for a shorter setup, or run the full 25.75" length for side imaging transducers that need to reach well below the hull. A fish finder mount compatible with your unit is required to complete the install and is sold separately.
- CellBlok interior dimensions: 6.375" x 4.25" x 2.60"
- CellBlok exterior dimensions: 10.25" x 6.75" x 3.50"
- CellBlok weight: 1.4 lbs
- Minimum 10.5" of track required
- SwitchBlade overall length: 25.75" (cuttable to fit)
- Compatible with YakAttack/Nocqua 10Ah and Dakota Lithium 10Ah batteries
- Compatible with YakAttack GearTrac, MightyMounts, Scotty, RAM, and YakGear track systems
- Adapter required for FeelFree, 3 Water, and Jonny Boats (sold separately)
- Fish finder mount and GearTrac not included
- Assembly required
- Made in the USA, covered by Built for Life Guarantee
Product Information
Product Information
Shipping & Returns
Shipping & Returns
YakAttack - CellBlok and SwitchBlade Combo
YakAttack - CellBlok and SwitchBlade Combo
YakAttack CellBlok and SwitchBlade Combo
Getting a fish finder installed on a kayak without drilling holes, running wires through the hull, or ending up with a cluttered, hard-to-remove setup has always been more complicated than it should be. The CellBlok and SwitchBlade Combo solves all of that in one clean package.
The CellBlok is a track-mounted battery box whose top surface doubles as a mounting platform for both the SwitchBlade Transducer Arm and your fish finder mount, keeping everything self-contained and removable as a single unit. Two track mount knobs are all that hold it in place, so the whole system attaches and detaches quickly without tools. Injection-moulded construction keeps weight down to 1.4 lbs, and enlarged cable wraps accommodate the larger wiring used in modern fish finders. A minimum of 10.5" of track is required for installation.
The SwitchBlade Transducer Arm is built around a hydrodynamic blade design that minimises water turbulence and gurgle, making it quieter and more efficient than conventional transducer arms. The multi-pivot folding design collapses compactly when not in use, and the arm length is fully customisable by cutting to fit your specific kayak. Remove the middle arm section for a shorter setup, or run the full 25.75" length for side imaging transducers that need to reach well below the hull. A fish finder mount compatible with your unit is required to complete the install and is sold separately.
- CellBlok interior dimensions: 6.375" x 4.25" x 2.60"
- CellBlok exterior dimensions: 10.25" x 6.75" x 3.50"
- CellBlok weight: 1.4 lbs
- Minimum 10.5" of track required
- SwitchBlade overall length: 25.75" (cuttable to fit)
- Compatible with YakAttack/Nocqua 10Ah and Dakota Lithium 10Ah batteries
- Compatible with YakAttack GearTrac, MightyMounts, Scotty, RAM, and YakGear track systems
- Adapter required for FeelFree, 3 Water, and Jonny Boats (sold separately)
- Fish finder mount and GearTrac not included
- Assembly required
- Made in the USA, covered by Built for Life Guarantee
Original: $127.19
-65%$127.19
$44.52Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
YakAttack CellBlok and SwitchBlade Combo
Getting a fish finder installed on a kayak without drilling holes, running wires through the hull, or ending up with a cluttered, hard-to-remove setup has always been more complicated than it should be. The CellBlok and SwitchBlade Combo solves all of that in one clean package.
The CellBlok is a track-mounted battery box whose top surface doubles as a mounting platform for both the SwitchBlade Transducer Arm and your fish finder mount, keeping everything self-contained and removable as a single unit. Two track mount knobs are all that hold it in place, so the whole system attaches and detaches quickly without tools. Injection-moulded construction keeps weight down to 1.4 lbs, and enlarged cable wraps accommodate the larger wiring used in modern fish finders. A minimum of 10.5" of track is required for installation.
The SwitchBlade Transducer Arm is built around a hydrodynamic blade design that minimises water turbulence and gurgle, making it quieter and more efficient than conventional transducer arms. The multi-pivot folding design collapses compactly when not in use, and the arm length is fully customisable by cutting to fit your specific kayak. Remove the middle arm section for a shorter setup, or run the full 25.75" length for side imaging transducers that need to reach well below the hull. A fish finder mount compatible with your unit is required to complete the install and is sold separately.
- CellBlok interior dimensions: 6.375" x 4.25" x 2.60"
- CellBlok exterior dimensions: 10.25" x 6.75" x 3.50"
- CellBlok weight: 1.4 lbs
- Minimum 10.5" of track required
- SwitchBlade overall length: 25.75" (cuttable to fit)
- Compatible with YakAttack/Nocqua 10Ah and Dakota Lithium 10Ah batteries
- Compatible with YakAttack GearTrac, MightyMounts, Scotty, RAM, and YakGear track systems
- Adapter required for FeelFree, 3 Water, and Jonny Boats (sold separately)
- Fish finder mount and GearTrac not included
- Assembly required
- Made in the USA, covered by Built for Life Guarantee
