YakAttack - TowNStow Bunkster Kayak Cart
YakAttack - TowNStow Bunkster Kayak Cart
Getting a kayak from the parking lot to the water's edge on hard-packed surfaces is straightforward work with the right cart under it, and the TowNStow Bunkster is built to handle that job reliably trip after trip.
The Bunkster uses a bunk-style configuration where two parallel uprights run along the hull, giving a stable and secure carry position across a wide range of modern kayak hull shapes. The uprights slide along the axle and lock into six preset width positions from 6.25" to 16" wide without any tools. Four grippy snap-on rubber bumpers protect the hull and prevent shifting during transport. Tie-down options are well covered: strap loops built into the wheel hubs work well for wider hulls that extend beyond the wheelbase, while the centre axle tie-down point suits narrower watercrafts. Both accept 1" cam straps or rope under 5/16" diameter.
The whole cart breaks down into five components without tools and stows inside most kayak hatches, so you're not leaving it unattended at the launch while you park. Two kickstands, one per side, support the cart at a stable loading angle and snap away when not in use. The airless 3-piece BeadLoc wheels with grippy rubber tread are built for hard-packed surfaces and swap to sand tires with a push of a button.
- Axle length: 26.5"
- BeadLoc wheel size: 12" diameter, 2.5" wide
- Weight capacity: 450 lbs flat surface, 300 lbs trail, 200 lbs at 5" drop
- Weight: 11 lbs 1 oz
- Bunk-style uprights, 6 width positions: 6.25" to 16"
- Four snap-on rubber bunk pads
- Multiple integrated tie-down points for 1" cam straps (not included)
- Tool-less assembly and disassembly, stows in most kayak hatches
- Dual kickstands
- Airless 3-piece BeadLoc wheels with rubber tread
- UV-resistant polymers, anodised aluminium, and stainless steel hardware
- Built for Life Guarantee
Product Information
Product Information
Shipping & Returns
Shipping & Returns
YakAttack - TowNStow Bunkster Kayak Cart
YakAttack - TowNStow Bunkster Kayak Cart
YakAttack - TowNStow Bunkster Kayak Cart
Getting a kayak from the parking lot to the water's edge on hard-packed surfaces is straightforward work with the right cart under it, and the TowNStow Bunkster is built to handle that job reliably trip after trip.
The Bunkster uses a bunk-style configuration where two parallel uprights run along the hull, giving a stable and secure carry position across a wide range of modern kayak hull shapes. The uprights slide along the axle and lock into six preset width positions from 6.25" to 16" wide without any tools. Four grippy snap-on rubber bumpers protect the hull and prevent shifting during transport. Tie-down options are well covered: strap loops built into the wheel hubs work well for wider hulls that extend beyond the wheelbase, while the centre axle tie-down point suits narrower watercrafts. Both accept 1" cam straps or rope under 5/16" diameter.
The whole cart breaks down into five components without tools and stows inside most kayak hatches, so you're not leaving it unattended at the launch while you park. Two kickstands, one per side, support the cart at a stable loading angle and snap away when not in use. The airless 3-piece BeadLoc wheels with grippy rubber tread are built for hard-packed surfaces and swap to sand tires with a push of a button.
- Axle length: 26.5"
- BeadLoc wheel size: 12" diameter, 2.5" wide
- Weight capacity: 450 lbs flat surface, 300 lbs trail, 200 lbs at 5" drop
- Weight: 11 lbs 1 oz
- Bunk-style uprights, 6 width positions: 6.25" to 16"
- Four snap-on rubber bunk pads
- Multiple integrated tie-down points for 1" cam straps (not included)
- Tool-less assembly and disassembly, stows in most kayak hatches
- Dual kickstands
- Airless 3-piece BeadLoc wheels with rubber tread
- UV-resistant polymers, anodised aluminium, and stainless steel hardware
- Built for Life Guarantee
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
YakAttack - TowNStow Bunkster Kayak Cart
Getting a kayak from the parking lot to the water's edge on hard-packed surfaces is straightforward work with the right cart under it, and the TowNStow Bunkster is built to handle that job reliably trip after trip.
The Bunkster uses a bunk-style configuration where two parallel uprights run along the hull, giving a stable and secure carry position across a wide range of modern kayak hull shapes. The uprights slide along the axle and lock into six preset width positions from 6.25" to 16" wide without any tools. Four grippy snap-on rubber bumpers protect the hull and prevent shifting during transport. Tie-down options are well covered: strap loops built into the wheel hubs work well for wider hulls that extend beyond the wheelbase, while the centre axle tie-down point suits narrower watercrafts. Both accept 1" cam straps or rope under 5/16" diameter.
The whole cart breaks down into five components without tools and stows inside most kayak hatches, so you're not leaving it unattended at the launch while you park. Two kickstands, one per side, support the cart at a stable loading angle and snap away when not in use. The airless 3-piece BeadLoc wheels with grippy rubber tread are built for hard-packed surfaces and swap to sand tires with a push of a button.
- Axle length: 26.5"
- BeadLoc wheel size: 12" diameter, 2.5" wide
- Weight capacity: 450 lbs flat surface, 300 lbs trail, 200 lbs at 5" drop
- Weight: 11 lbs 1 oz
- Bunk-style uprights, 6 width positions: 6.25" to 16"
- Four snap-on rubber bunk pads
- Multiple integrated tie-down points for 1" cam straps (not included)
- Tool-less assembly and disassembly, stows in most kayak hatches
- Dual kickstands
- Airless 3-piece BeadLoc wheels with rubber tread
- UV-resistant polymers, anodised aluminium, and stainless steel hardware
- Built for Life Guarantee
